Distributor Finder

Product Finder

SEARCH
CONTACT US

Bearings - 2009-02-18

Milk Processor

NSK’s solid lubricant, Molded-Oil™ bearings are providing cost savings of £9,992 per annum

NSK’s solid lubricant, Molded-Oil™ bearings are providing cost savings of £9,992 per annum, as a result of solving a problem of premature bearing failure on an IHT conveyor at a UK milk processing plant.

The cause of the problem on the conveyor was inaccessible bearings that were impossible to lubricate. As a result, engineers were changing bearings every 10 weeks, resulting in combined downtime, labour and equipment costs of £9,922 annually.

Obviously this ongoing cost was unsustainable; so an initiative was launched with a view to sourcing more durable bearings. As part of this initiative, an engineer from NSK’s Cost Savings Programme was called in to give advice. The programme is designed for end-user bearing customers that are looking for a value-added service that actually helps them to improve reliability, reduce operating costs, and improve efficiency and profitability. These objectives are achieved by delivering tangible savings to assets, such as equipment and machinery, and also by improving the working knowledge of maintenance and engineering personnel.

The engineer quickly identified the problem to be water washout, which is extremely common in food processing applications. This is the tendency of lubricant to be flushed out of conventional bearings under repeated washdowns. The loss of lubricant is usually progressive rather than immediate; but the result is inevitably the same: premature failure of the bearing or bearings concerned.

NSK has worked with majors in the Food and Beverage Industry on this problem, providing a very effective solution, known as Molded Oil™. These bearings employ a special solid lubricant that effectively addresses loss of lubricant due to washdowns. As such, it transforms the performance of machinery, in terms of reliability, maintenance- free intervals and operation, in environments exposed to high humidity, corrosion and contamination.

Molded-Oil™ can significantly increase the operating life of grease lubrication in water contaminated environments. Moreover, the technology means that operating environments are kept free of grease; and there is no need for refilling of lubricant, as Molded-Oil™ provides a continuous supply of lubricating oil.

NSK recommended F-UC206 Molded-Oil™ bearing inserts to overcome the failure modes. These bearings cost just £99 but are saving nearly £10,000 per year. In addition, NSK also recommended changing the existing housings for the bearings to Silver-Lube® units. A range of mounted bearing units designed specially for use in industries where hygiene considerations and corrosion and chemical resistance are important; typically bottling and brewing, food processing, pharmaceuticals, fisheries and chemical processing.

Contact Search

Please select your options to view your contact.

Your result