SEARCH

Introduction

An important manufacturer of raw steel materials (strip and tubes) was facing issues with standard bearings, mounted in the welding station of a tube making machine. The high temperature of the welding area shortened the bearing life, breaking after short operation and causing continuous production stoppages for bearing replacement. The customer calculated a loss in production of 500 kg of tubes at every stoppage plus partial scrap of actual production. NSK proposed bearings for high temperature environments with special grease. With this solution the customer increased the bearing life. He also established preventive maintenance periods. All These measures led to increased productivity and Elimination of scrap.

 

Key Facts

  • Welding station on steel tube making machine
  • Short life of bearings causing production stoppage
  • Productivity reduced by 500 kg of tube per stoppage
  • Every production stoppage causing partial scrap of actual production
  • Temperature of welding area effected life of bearings
  • NSK Solution: high temperature Deep Groove Ball Bearings
  • Increased bearings life
  • Customer was able to start a preventive maintenance programme
  • Steel Tube Making Machine High Temperature Deep Groove Ball Bearings

     

  • Steel Tube Making Machine
  • High Temperature Deep Groove Ball Bearings

Value Proposals

  • The customer explained that each stoppage caused a loss in production
  • NSK recommended Deep Groove Ball Bearings for high temperature with a special grease
  • A trial with the new bearings showed an increased bearing life
  • The successful test resulted in reduced machine downtime and increased productivity
  • The customer implemented a regular maintenance programme

     

Product Features

  • Bearing steel heat stabilised to +200 °C
  • High temperature Viton seal closures
  • High temperature grease +160 °C

     

  • Greater than normal clearance to accommodate bearing ring temperature differentials
  • Bearing greased and sealed for life
  • Bearing operating temperature +180 °C

     

Cost Saving Breakdown

Before Cost p.a. NSK Solution Cost p.a.
6 Bearings set x 15 replacements/year  € 180 6 Bearings set x 6 replacements/year  € 360
1h downtime x 100€ labour cost x 15
replacements/year
€ 1.500 1h downtime x 100€ labour cost x 6
replacements/year
€ 600
Productivity loss of 1h x 15 replacements/year € 7.500 No costs € 0
Total Costs € 9.180 € 960

Reference:SS-E-7027

Consent

NSK uses third-party services that help us to improve our web site and show you more interesting content. In order to use these services, we need your consent. This can be revoked at any time. More information can be found here Link to privacy policy.