MENU EU/ENEU/EN Search NSK - Motion & Control

Search our news database.

NSK news articles and press releases from the last few years.

For any questions regarding NSK Europe's public relations please use our contact form or refer to our press department via E-Mail to press-eu@nsk.com or by phone under +49-(0)2102-481-2152

400 Articles

NSK Groundbreaking Ceremony for New Production Facility Hefei, China

2011-11-16

NSK Groundbreaking Ceremony for New Production Facility Hefei, China On October 20th,  2011 NSK Ltd. held its groundbreaking ceremony at the site of its new production facility located in the city of Hefei, Anhui Province, in China. The ceremony was attended by representatives from th...

Choosing the Right Bearings

2011-11-11

Choosing the Right Bearings Expert advice can cut costs dramatically  There are many factors to take into account when selecting bearings. Designers in the machine-tool and plant construction industry should consider their options carefully if they want to guarantee maximum avail...

European Commission Competition Inspections

2011-11-09

European Commission Competition Inspections Norbert Schneider, Chief Executive Officer of NSK Europe Limited, confirmed that, on Tuesday 8 November, the Company was subject to an inspection by the European Commission at its offices in Ratingen, Germany, in connection with an investiga...

Traction Motor Bearings for the Rail Industry

2011-11-09

Traction Motor Bearings for the Rail Industry Insulated Bearings enable latest generation trains to go much further without maintenance stops  Today’s generation of trains are required to go faster than ever before, and to travel much longer distances without maintenance.  These t...

Angular-Contact Ball Bearings with Oil-Air Lubrication

2011-10-14

Angular-Contact Ball Bearings with Oil-Air Lubrication Manufacturing and production techniques have changed radically as a result of the electronic revolution seen in recent decades. Even the most complicated shapes can be produced precisely at low cost. In many cases, machining produ...

Ball Screws for High Speeds and High Loads

2011-10-11

Ball Screws for High Speeds and High Loads With newly developed seal and optimised ball recirculation system  The latest generation of NSK’s HTF high-load ball screws has been optimised to cater for higher speeds . An enhanced ball recirculation system also reduces noise, while...

Improved Cooling for High-Speed Ball Screws

2011-09-29

Improved Cooling for High-Speed Ball Screws Temperature control at the site of friction  Whenever ball screws perform short movements at high cycle rates, nut cooling provides much better temperature control – and therefore more precise positioning – than the hollow-shaft spindle...

HMS-Series - High-Speed Ball Screws

2011-09-28

HMS-Series - High-Speed Ball Screws New high-speed ball screws run extremely quietly  For high-performance drive systems in machine tools The machine tool industry is placing ever-increasing demands on linear drive systems in regards to traverse rates, precision, and quiet ru...

Angular-Contact Ball Bearings of BSBD Series

2011-09-23

Angular-Contact Ball Bearings of BSBD Series Bearings for use in ball screws  Ball screws are responsible for precise positioning in modern machine tools. The moving components need highly exact ball bearings to achieve this. Multiple-row angular-contact ball bearings have proved...

NSK’s Plant in Newark (UK)

2011-09-22

NSK’s Plant in Newark (UK) NSK’s European Industrial Business Unit and its plant in Newark (UK)  Bearings and linear technology made in Europe Where are the products that NSK supplies to the European machine tool industry made? Some clients and industry insiders may be surpr...

PH Series for Highly Precise Linear Movements in Machine Tools

2011-09-17

PH Series for Highly Precise Linear Movements in Machine Tools Combinable guides with more exacting tolerances  High precision despite combinable carriages and rails: this is the key advantage of a new series of linear guides. This innovation is made possible by optimised producti...

New Sealing Concept for Ball Screws: Improved Seal with Low Friction

2011-09-16

New Sealing Concept for Ball Screws: Improved Seal with Low Friction NSK has developed a new ball screw sealing concept for the machine-tool industry, which delivers significantly improved sealing performance compared with standard labyrinth seals without compromising on friction. Th...

New Angular-Contact Ball Bearings - NSKTAC-SHR Series

2011-09-09

New Angular-Contact Ball Bearings - NSKTAC-SHR Series Highly stressed angular-contact ball bearings for ball screw support applications  The new angular-contact ball bearings from the NSKTAC-SHR series were specially developed for use in ball screws. Although they have smaller bor...

Injection Moulding: Achieving Higher Performance and Precision

2011-09-07

Injection Moulding: Achieving Higher Performance and Precision ENGEL E-motion: Electromechanics Replaces Hydraulics    Engel Austria is one of the pioneers in the field of electromechanical drive technology for plastics machines. The company presented an all-electric injection moul...

Ultra-High-Speed Large-Diameter Ball Bearings for Motors in Hybrid Cars

2011-08-15

Ultra-High-Speed Large-Diameter Ball Bearings for Motors in Hybrid Cars Bearings help to improve fuel economy and raise power output NSK Ltd. announced that it has developed large-diameter bearings for motors that are capable of ultra-high-speed rotation exceeding two million dmn...

Low-Friction Tapered Roller Bearing with Plastic Cage

2011-08-11

Low-Friction Tapered Roller Bearing with Plastic Cage NSK Develops Next-Generation Low-Friction Tapered Roller Bearing with Plastic Cage Design for the Drivetrain Market NSK Ltd. announced it has developed a next-generation tapered roller bearing featuring a plastic cage design an...

EMO Hanover 2011: New Developments in Machine Tool Drives

2011-08-10

EMO Hanover 2011: New Developments in Machine Tool Drives Trends in linear technology  What are the latest trends in electromechanical drives for machine tools? Find out at the EMO trade fair. Linear technology makes a major contribution towards ensuring that new generations of m...

Megapositioner™ Units

2011-08-09

Megapositioner™ Units NSK Develops Rigid, Ultra-Large Output Torque Rotary Positioning Unit Megapositioner™  NSK Ltd. announced that it has developed Megapositioner™ units that deliver high-speed and precise rotary positioning of loads with a high moment of inertia1 up to 700kg...

Corporate: NSK Further Strengthens its Global Corporate Structure

2011-07-26

Corporate: NSK Further Strengthens its Global Corporate Structure No impact of power shortages in Japan on operations  NSK Ltd. (NSK: Headquarters: Tokyo, Japan; President and CEO: Norio Otsuka) today announced that there will be no impact of power shortages in Japan on NSK’s pro...

NSK Develops Tailor-Made Drive Solutions for Röders

2011-07-22

NSK Develops Tailor-Made Drive Solutions for Röders High-precision linear drives for high-speed cutting  Röders GmbH has a good reputation worldwide as a specialist in high-speed cutting (HSC). NSK supplies high-precision linear guides for the company’s RXP series , which was l...