Ball Screws - S-HTF Series

The stronger and longer-lasting S-HTF series of ball screws suitable for high-load drive applications have been developed for electric injection moulding machines and servo press machines. >>

Ball Screws - High Durability

NSK developed a surface processing technology to improve ball screw raceways. Even under unsettled conditions, the High-Durability Ball Screws show much better resistance to wear. >>


Ball Screws - Interchangeable

Ball Screws - Interchangeable

NSK now offers a new series of ball screws where the nut and shaft can be combined freely with a slight clearance. They are subject to DIN 69051 or ISO 3408 standards. >>


A-Series & S-Series

NSK has standardized certain popular ball screw types by creating a standard stock series for immediate delivery with: 
  • machined shaft end configuration for support units (A-Series)
  • unmachined unhardened shaft ends for easy reworking (S-Series)

Compact FA-Series

Standard stock series for immediate delivery of BSS Series high-speed, low-noise Ball Screws; next-generation compact Ball Screws offer quiet, high-speed operating performance >>

Balls Screws - LPR / PR Precision Rolled Series

LPR/PR-Series has made a remarkable improvement in sealing performance. The LPR/PR-Series can be taken with or without maintenance-free NSK K1 lubrication unit >>

FSS - Series Ball Screw

FSS Series ball screws for actuators and transfer equipment, with a flexible stroke setting and simple support configuration. >>

BSS Ball Screws Series

High-Speed, Low-Noise Ball Screws BSS Series. Quiet and compact, with unparalleled high-speed performance. Low-noise BSS Series Ball Screws are suitable for an extensive range of uses, from transportation equipment to machine tools. >>

HMD Ball Screws Series

Ball Screws for High-Speed Machine Tools HMD Series. Upgraded version of the highly regarded HMC Series, featuring new recirculation method that enables high-speed, low-noise operation. >>

Nut Cooling Ball Screw

Simplifying Ball Screw cooling to make precision machines faster and more precise. Nut cooling can be implemented (for HMD nuts) without changing the machine design. >>

HMS Series Ball Screws

HMS Series Ball Screws for high speed and low noise, maintaining precision and efficiency through a fine lead zone. Suitable for high accuracy and medium sized machine tool. >>

HTF Series Ball Screw

HTF series for highload applications. >>

HTF-SRE Series Ball Screw

An extension to the current HTF Series, giving higher traverse rates and lower noise. Including ball separation technology and ball recirculation system. >>

HTF Super High Thrust Ball Screws

High-Speed, High-Load Ball Screws HTF-SRC Series. Next-generation Ball Screws for heavy load applications, evolved from the best-selling HTF Series of high-load Ball Screws. >>

Super Large Ball Screw

Designed for electrically operated plastic injection moulding machines with a clamping force up to 3000 tons and more. Usage in big presses is possible. >>

Ball Screws DIN Standard Series

NSK adds ball screws that accord with DIN standards widely used throughout Europe >>

Ball Screw II. Generation - High-Speed, Low Noise

Speed increased, noise caused by the raceway reduced. >>

Corrosion Protection for Ball Screws and Linear Guides

NSK applies a fluororesin coating as a surface treatment on electrolytic anti-rust black film as the optimal rust prevention coating for linear guides and ball screws. >>

Efficient Sealing Concept for Ball Screws

The X1 sealing concept provides a highly effective interior and exterior seal for ball screws. >>

BSBD Series Ball Screw Support Bearing

Ball Screw Support bearings - designed to be compact, ready for easy & accurate installation, greased for life, with low friction and heat generation sealing. >>

Support Units for Light Loads and Small Equipment

Support unit for light loads and small equipment, aligned with standard angular contact ball bearings; low dust emission type for clean environments and low profile type also available.   

The technical details are available in the General Ballscrew Catalogue and can be downloaded from there

NSKTAC-SHR series of Ball Screw Support Bearings for High Load Application

The NSKTAC-HR series has been developed for support ball screws operating under high loads. The new NSKTAC-SHR series allow users to maintain high capacity performance with a smaller diameter of the screw shaft end. >>

NSKHPS Ball Screw Angular Contact Thrust Ball

These NSKHPS bearings have been improved by focusing on material cleanliness - which has a big impact on the bearings life.  >>

Contact Search

Please select your options to view your contact.

Your result


NSK uses third-party services that help us to improve our web site and show you more interesting content. In order to use these services, we need your consent. This can be revoked at any time. More information can be found here Link to privacy policy.