Search

Stainless steel ES1

NSK stainless steel material ES1 provides better corrosion resistance than standard stainless steel SUS440C in a high-hummidity environment.

Transmission Bearings with Retainer Plate

NSK transmission bearings with retainer plate allow an optimal assembly in the vehicle transmission. A perfect alignment between the plate holes and the gearbox housing is ensured through the rotation of the plate on the bearing outer ring.

SWR Spherical Roller Bearings

NSK’s SWR Spherical Roller Bearings provide solutions to challenges faced by spherical roller bearings used in continuous casting guide rolls. The material strength was improved to prevent breakage of the outer ring after the occurrence of flaking.

Silver-Lube® Mounted Units

NSK's Silver-Lube® series are corrosion resistant bearing units specifically for use in industries where frequent thorough washdowns are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range.

Four-Row Long-Life Tapered Roller Bearings

NSK four-row tapered roller bearings for rolling mills are pre-lubricated with the water-resistant grease AQGRD and offer long service life, reduced maintenance cost and increased operational efficiency.

SHX Steel

SHX is a heat-resistant & wear resistant steel resulting from NSK’s special proprietary materials & heat treatment technology; it offers unrivalled ultra high-speed performance and extended fatigue life ideally suited for machine tools running to their maximum capacity.

TL Series Spherical Roller Bearings

NSK’s TL (tough & long life) Series of Spherical Roller Bearings are specifically designed for dryer rolls in papermaking machinery operating under extremely high temperature conditions.

Tapered Roller Bearings with Aligning Rings

NSK’s Taperer Roller Bearings with Aligning Rings are highly functional and specialized bearing for the locating position of guide rolls in Continuous Casting Machines at Iron & Steel Works.

Low-Friction Tapered Roller Bearings with Plastic Cage

This Tapered Roller Bearing with plastic cage is dedicated to the automotive transmission market and enables a 20% friction reduction, compared with conventional products using a steel cage.

Low-Friction TM-Seal for Transmission Bearings

NSK has developed a low-friction seal for transmission bearings that reduces the seal friction by 50%, in comparison to the old TM-seal design

Tapered Roller Bearings

NSK's Tapered Roller Bearings can dramatically improve the life of your machine through a significant increase its dynamic load rating.

Quiet & Low-Vibration Series Spherical Roller Bearings

NSK's Quiet & Low-Vibration Series of Spherical Roller Bearings have been specifically designed for Elevators. These bearings have high accuracy rollers and an improved roughness of the inner & outer ring raceways.

ECA Brass Cage Spherical Roller Bearing

NSK has developed a series of Spherical Roller Bearings with a ECA brass cage to aim for productivity increase with interchangeable part.

Toughcarrier - TCH Series

The NSK Toughcarrier TCH Series is a super high load capacity single-axis actuator. The rolling guide elements have been changed from balls to rollers to allow the single-axis actuator to bear a greatly increased load and have greater rigidity than a standard Monocarrier.

Long-life Sendzimir Backup Roll Bearings

Long-life Backup Roll Bearings - These bearings were specifically designed for Sendzimir mills in Iron and Steel works. Due to the SAC steel and an optimised seal design, they achieve long life under conditions of contaminated lubrication and high-speed operating conditions.

Self-Lube® Inserts with Flinger Seals

NSK’s Self-Lube® Inserts equipped with Flinger Seals have been especially designed to provide the insert with additional protection from external contaminants, like stone projection or high pressure washdowns.

Detachable Seal Spherical Roller Bearings

NSK has developed a detachable seal for Spherical Roller Bearings to withstand the harsh conditions of the Quarrying & Mining Industry - which requires highly reliable equipment .

Sealed-Clean Rotating End Cap Tapered Roller Bearings

Axle Bearings support the axle directly and operate in harsh environments where vibrations between the rail and wheel are transmitted directly to the bearing.

Agri Disc Hub - AS Series

Agri Disc Hub - AS Series: NSK’s Flanged Bearing Unit (4,5,6 holes) with integrated shaft sealing and 40 ° contact angle. Specially designed to be interchangeable, maintenance free, increasing the machinery’s availability and reliability in extreme conditions.

Miniature Bearings

NSK Miniature Bearings - Small, miniature, and instrument precision bearings broadly come in deep groove and angular contact varieties. Deep-groove types may have a flanged outer ring, inner ring width or thin-walled cross-sections.

Europe

Americas

Middle East

Africa

ASEAN & Oceania

Asia