NSK's newly developed low-friction seal for transmission bearings reduce the seal friction by 50% in comparison to the old TM-seal design (10% friction reduction on the complete bearing). NSK fitted bearings with TM-seals are used inside transmissions to inhibit the ingress of gear dust and other contaminants.
The seal friction was reduced by narrowing the seal lip by 10% and lengthening it by 70%, compared to conventional bearings
The seal lip shape was improved based on computer analysis; the new shape improves lip-following and stabilises the contact pressure along the edge.
Seal friction reduced by up to 50% compared to the old TM-seal design and total bearing friction reduction of around 10%.
Same durability as the replaced TM-bearings by preventing the ingress of contaminants to the transmission oil in the bearing. The bearing life is improved by 5 times in comparison to open bearings.
|TM||NSK Sealed-clean technology seal|
|11||sequential number of design|
|E7||outer ring Special Feature|
|X26||Heat Stabilisation of Rings|